Thursday, May 31, 2012

More Double Bites!

The Colorado and Fluted Indiana blades arrived!

These are spinners for large predatory fish. Takes a lot of hardware to build spinners above 2 ounces and almost 9 inches long. Lots of components. Double blades, double skirts, dressed trebles. Once you get the parts, they are a lot of fun to build though!

Hefty in your hand and a real tug going through the water. No wonder fish take notice, they cause turbulence. You know when they engage and you know when they don't...

I found that I had problems using the S clevis on the 2oz+ Double Bite Colorado blade spinners.

Several observations.

Big Double blade spinners have a couple unique behaviors that can cause issues.

Some blade types misbehaved and did not spin well.

I found the #8 Colorado blades did not spin well in the S clevis. Indiana's worked, Fluted Indiana's worked, French Blades worked. Colorado's seemed too wide for the balanced S clevis to get the other side started. I believe the Colorado blade's more circular shape causes interference between the blades. When big spinners don't spin, it's immediately apparent. Early slow speed collisions between the blades kept them from both engaging and balancing out. The single Colorado blade on a single clevis worked fine.

I tried a variety of changes, trying to solve the problem, increasing drag by adding a bigger buck tail, more weight adding more components, less weight removing components, just no luck with the S clevis and Colorado blades.

I finally went to an intertwined two clevis blade attachment for the Colorado's. Two clevises provided enough flex and clearance during startup to allow both blades to start independently and not collide.

This fixed the problem on the Colorado blades and also worked on other bigger blade styles. Lesson learned.

Another symptom with the double blades, was that I got far more leader hangups. The leader's swivel would bind between the blades and stop rotation.

That irritating retrieve where the blades are not spinning and the line or leader is wrapped or tangled between the blades. Sometimes it can happen on single blade spinners, but definitely more often on doubles.

My leaders swivel clasp folded over as the spinner sank, deep enough, during some of the landings that the first blade rotation slipped over it and the metal to metal (clevis to swivel clasp) contact locked up the blade rotation.

To solve this issue I added a couple of bearing beads above the clevises. The bearings moved the blades down the wire enough to avoid the metal to metal (clevis to swivel clasp) contact and let the cable slip out on the first rotation. A couple more beads fixed that problem.

Much Better! Spinner misbehavior solved.

Here's some new pictures.

Fish Creek Spinners FluorGreen 2.5oz Double Bite Skirted Armadillo
This one has zonker strips banded on the 2/0 treble vs tied buck tail. Two bands, one for the fluorescent green then three shorter blacks and another band. I like it, so will the fish! Ultra fluid when wet, lots of color combo potential and much quicker to dress a hook.
Fish Creek Spinners Nickel 2.5oz Double Bite Skirted Armadillo w/Zonker

Fish Creek Spinners Green 2.5oz Double Bite Skirted Armadillo


Fish Creek Spinners 2.5oz Red Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Brown Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Fluor Orange Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Psycho Yellow Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Purple Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Blue Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz White Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Perch Double Bite Skirted Armadillo

Fish Creek Spinners 2.5oz Pink Double Bite Skirted Armadillo
If you fish Muskie or Pike, you already have the tackle to fish these. Put a few in your tackle box while the discount codes are still active!

Double Bite Skirted Armadillo's


Saturday, May 26, 2012

June 2012 Spinner Drawing - what else? June Bug Spinners

Traveling with family on vacation and back in Colorado on 7/7/12.

Sorry for the inconvenience, but check back in a week for the drawing results.
Ok, got a few minutes in Illinois

Here's the outcome.


If you cant read that, it's wdstk3, thepartydjz, and dbark61. Send an email to let me know which JuneBug flavors you want your set to be. I listed Six 1/8oz , Three 2/3oz, or Six mini-leaders. Since mid-may, I have also made some 1/18oz ultralites in the same design as 1/8oz, but smaller blades, beads, and single hooks. All worth consideration, IMO.

If you don't see or respond to the post, I'll email the winners. Congrats!

June is June Bug blade month - these blades are sweet. Strung on the stainless wire like an inline blade, but with a second brace. The brace provides a unique fixed angle of rotation and unusual and exceptional strobe during rotation. Quite the fish charmers.

Fish Creek Spinners June Bugs on the screen
Comment to enter, drawing will be held early July

Here's a testimonial from a test drive by a Washington State angler.


I love these babies. The fish just kept hitting them. Caught the largest fish of the take on the June Bug. 
  • They cast like a bullet when they are wet.
  • The blade will spin with almost no movement.
  • It sinks wonderfully slow.
  • The zonkers ungulate wildly when reeled in at a snails pace.
  • I can fish it slower than any other spinner I own.  
  • I don't have to worry about the blade spinning.  It would start spinning with almost no force, allowing me to gently oscillate the rod tip while the June Bug gently fluttered.  
Although I got a hit just reeling it in straight, the gentle oscillation of the rod tip at a snails pace seemed to bring on fierce strikes.
Thanks so much for sending me these.  I may not have tried them for some time.  Now, I want more and plan to purchase a handful soon.

In addition to the unique spinner blades, the transformers and leaders have a slip loop R bend hook attachment on the trailer loop. This enables hook changes and color substitutions if using dressed trebles.

So here's the drawing specifics - 

Six 1/8oz June Bug Transformers 
or three 2/3oz June Bug Skirted Muskie/Pike spinners 
or six mini June Bug leaders. 


Three Winners - winners take your pick and color choices.

The mini leaders aren't in the website yet, but will be by the time of the drawing.

Here's a few pictures with links to color choices.

June Bug Transformers

Fish Creek Spinners 1/8oz June Bug Transformer - F905
Medium sized blade sized similar to a #4 Indiana. Faceted glass body beads. Zonker strip banded #6 treble hooks attached by slip loop R bend can be replaced to exchange colors or opened to changed out alternate hooks - single hooks, weedless hooks, etc.

June Bug 2/3oz Skirted Armadillos

Fish Creek Spinners 2/3oz Skirted June Bug Armadillo

Same fixed angle of rotation - larger blade, similar to a #6 Indiana. Faceted glass or fluorescent plastic body beads separated by metal friction discs. The treble hook is split ring attached to allow hook substitutions and skirt color changes or replacements due to wear. Just remove the hook and splitring, slide off the old skirt and slide a new one over the trailer loop and integrated skirt mount.

Coming to the Web Store soon - Mini June Bug Leaders Slip trailer R bends

Fish Creek Spinners June Bug mini-leader
Smallest June bug blades sized similar to a #2 Indiana. Put a dressed treble on them and your ready to fish, or add a spinner, crawler harness, weedless hook, whatever comes to mind, let creativity be your guide.

Enter a uniquely identified comment on the blog post to enter. Something like "Count me in - John@SuperiorCo should work.

Many users have setup Online Signatures that have custom icons and pictures provided with the comment.

If you're using 'anonymous' on your comment, be sure to provide an alternate means of identification in the text. Otherwise you'll never know if you won and might be disqualified. If that happens, just correct the mistake with a second unique comment.

Forum and ID or First name and CitySt location have worked in the past, like - John@SuperiorCo

The unique identifying info is needed in the event you're one of the lucky winners.

If you use an email, you might pick up some spammers, but if you risk it and win, I'll send you a email notification. I'll update the post at month end listing the winners.

This drawing, 'anonymous' entrants have the month of July to check back to the blog post to see if they won. If you won, send me an email at - fishcreekspinners@gmail.com - to claim your prize.

State spinner prize preferences and provide your mailing information.

Too much hassle and lost time?

Here's a discount code for 25% off your total order valid through June 30th, 2012 - JBDraw - Just enter the promotion code during check out to adjust invoice line item prices.

Noise on the Line! - Fish Creek Web Store


Friday, May 18, 2012

Double Bite Skirted Armadillos - 2oz+

Challenged to beef up the 1oz skirted Armadillo, here's what I did to wake up a muskie.

Bigger blades for more bite, more body beads for added weight and balance,  doubled up the skirts for more tail drag, bigger #2/0 dressed treble. Then balanced everything during testing.  Almost 9 inches long and 2.25 ounces. Packaged in clear reuseable tubes.

Fluorescent Green 2oz+ Skirted Double Bite


Black 2oz Fish Creek Spinners skirted metal Armadillo


The wires .051 inch stainless. Body beads are powder painted 3/8oz solid marine brass. Transparent powder colors (red, blue, purple, green) uses nickel plated brass for extra luster.

The blades on these, are heavy .032 gauge #8 French blades. I've got .040 gauge #8 Smooth Colorado's and fluted #8 Indiana's ordered - Gold and Nickel mirror finish.  Finishes like Nickel and Gold are added for scratch and tarnish resistance and reflection.

Heavy gauge brass is soft. Most smaller blades are stamped from .018 gauge marine brass. When you package these big brass blades in the hundreds or thousands, they collide and scratch each other during shipping and storage. Polished brass doesn't fare as well as the finished blades.

These heavy blades really move some water. If you fish them with your rod tip up, the rotation raises the surface leaving a wake trail. The surface disturbance will help large predatory fish take notice. No fishing in wake free area's, lol.

Here's a few more pictures and some links.

Red 2oz Fish Creek Spinners skirted metal Armadillo
Brown 2oz Fish Creek Spinners skirted metal Armadillo
Spinners are listed separately in the bottom of the Large Spinner category, scroll down to find time!

Here's a link to the black one

Back to building out some more colors!




Saturday, May 5, 2012

Spinner of the Week - 1/8oz June Bug Transformer

Kind of foreshadowed with prior posts, but here's this weeks Spinner of the Week.

It's a new model and has 18 variations. 9 brass and 9 nickel.

I thinking of expanding that by a couple; one with a brass bead and another with nickle.

What's interesting (IMO) about this one is I built them with a slip loop on the hook end.

This lets you change out hooks or replace the banded Zonker strips to change their color while fishing.

Here's a couple pictures showing the process.

Fish Creek Spinners June Bug Transformer - R bend open

Slip loop R bend seated in tail bead

Bead slipped up

New banded Zonker choice

New dressed treble choice
Endless color variations on the dressed trebles.


Here's a link to the webstore showing all variations

June Bug Transformers

And a few pictures



Here's a 20% discount code good til the end of May - Junebug, should you want to put some in the water!

April 2012 Customer Appreciation Drawing Results


OK, finally getting around to doing this drawing, I apologize for the delay.

Looks like 8 entries in April's drawing


Using Random.org to pick 1 integer between 1 and 8

The winner is?


Looks like JLS from Ringgold, GA is our winner for the 12 trout spinners!

No wait, all our customers are winners.

I'll send each of the seven runner up's an FCS care package of 3 spinner surprises, including one of the new June Bug models.

Send an email to - fishcreekspinners@gmail.com - with your address info and I'll get some spinners headed to your mail box!

Get'em wet and send me a fish story!

Here's one of the new June Bug spinners.

Fish Creek Spinners June Bug Transformer

Enjoy the spinners and Noise on the Line!

Friday, May 4, 2012

Chop Shop Spinners and Hair Ball trebles

Here's a new method for dressing trebles, that's quick and easy, just need a skirt tool.

I kind of put two and two together to get here, and maybe it's been done and discussed before, but here goes.

Like I said, you'll need a skirt making tool, some rubber skirt bands, some rabbit zonker strips, and of course; treble hooks.

I bought a skirt making tool on a whim, about a year ago and never used it, opting to buy the skirts from Kayser. Kayser is a lure component company in Chicago. Terry's team makes great products and they're friendly people. They are eager to respond, and ship fast.

Here's a slideshow. The slideshow is in Picasa and you'll need to click the color wheel in lower right twice to get the toolbar to show up. Then mouse over the bottom border to bring it back if it pauses, manually advancing at your speed.





They're quick to make, plenty of primitive, but effective in the water.

A nice addition to the June Bug Transformers.


Hmmm, Belted Zonkers?
Banded Trebles?
Quick Dress Trebles?
Zonker Strippers?
Hair balls?

Time will tell. Leave a comment if you have an opinion.

Back to the bench and some relaxing - mindless - repetition!